Schedule in force 2026-08-31HTS 2026HTSRev17HTS 8465 · Chapter 84
Tariff Watch
For business

HTS 8465

Heading 8465 covers machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8465.10.00.05, the first line under this heading. Its Column 1 rate is 2.4%; other lines under 8465 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 39.90% and Italy carries 10.00%.

Chapter 84 · Verified 2026-08-31
HTS 2026HTSRev17

78 statistical lines under this heading · 3 distinct Column 1 rates · highest ad valorem total 39.90% from China · lowest 10.00% from Italy

OriginAd valorem layersLayersReported under
China CHN39.90%mfn + s301 + s3019903.88.01 9903.05.31
Vietnam VNM14.90%mfn + s3019903.05.84
Thailand THA14.90%mfn + s3019903.05.77
Brazil BRA14.90%mfn + s3019903.05.27
Japan JPN12.50%s3019903.05.49
South Korea KOR12.50%s3019903.05.71
Mexico MEX12.40%mfn + s3019903.05.55
Canada CAN12.40%mfn + s3019903.05.29
India IND12.40%mfn + s3019903.05.44
United Kingdom GBR12.40%mfn + s3019903.05.81
Germany DEU10.00%s3019903.05.39
Italy ITA10.00%s3019903.05.39
Table 1Rate by country of origin for 8465.10.00.05, resolved 2026-08-31. The first statistical line under 8465; other lines may carry different Column 1 rates.
CodeDescriptionColumn 1SpecialUnits
8465.10.00.05Tenonersinherited—No.
8465.10.00.15Otherinherited—No.
8465.10.00.25Numerically controlledinherited—No.
8465.10.00.35Otherinherited—No.
8465.10.00.45Otherinherited—No.
8465.10.00.50Otherinherited—No.
8465.20.10.00For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising3%Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No.
8465.20.50.00For bending or assembling2.9%Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No.
8465.20.80.00Other2.4%Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No.
8465.91.00.02Rip sawsinherited—No.
8465.91.00.06Panel sawsinherited—No.
8465.91.00.12Band sawsinherited—No.
8465.91.00.16Cross-cut and optimizing sawsinherited—No.
8465.91.00.22Otherinherited—No.
8465.91.00.27Sawmill machinesinherited—No.
8465.91.00.32Radial arm sawsinherited—No.
8465.91.00.36Tilting arbor table sawsinherited—No.
8465.91.00.41Rip sawsinherited—No.
8465.91.00.47Miter sawsinherited—No.
8465.91.00.49Scroll sawsinherited—No.
8465.91.00.53Valued under $3,000 eachinherited—No.
8465.91.00.58Otherinherited—No.
8465.91.00.64Valued under $1,000 eachinherited—No.
8465.91.00.68Otherinherited—No.
8465.91.00.74Cross-cut and optimizing sawsinherited—No.
8465.91.00.78Otherinherited—No.
8465.91.00.91Otherinherited—No.
8465.92.00.03Mouldersinherited—No.
8465.92.00.06Routersinherited—No.
8465.92.00.16Otherinherited—No.
8465.92.00.26Valued under $3,000 eachinherited—No.
8465.92.00.29Otherinherited—No.
8465.92.00.31Mouldersinherited—No.
8465.92.00.34Valued under $1,000 eachinherited—No.
8465.92.00.37Otherinherited—No.
8465.92.00.42Valued under $1,000 eachinherited—No.
8465.92.00.46Otherinherited—No.
8465.92.00.51Valued under $3,000 eachinherited—No.
8465.92.00.55Numerically controlledinherited—No.
8465.92.00.58Otherinherited—No.
8465.92.00.62Valued under $1,000 eachinherited—No.
8465.92.00.66Otherinherited—No.
8465.92.00.72Otherinherited—No.
8465.92.00.91Otherinherited—No.
8465.93.00.04Belt sanders, for a belt width 60 cm or widerinherited—No.
8465.93.00.12Otherinherited—No.
8465.93.00.30Valued under $1,000 eachinherited—No.
8465.93.00.45Valued $1,000 or over but under $3,000 eachinherited—No.
8465.93.00.55Otherinherited—No.
8465.93.00.65Belt sanders, for a belt width 60 cm or widerinherited—No.
8465.93.00.75Otherinherited—No.
8465.93.00.91Otherinherited—No.
8465.94.00.05Used or rebuiltinherited—No.
8465.94.00.15Doweling machinesinherited—No.
8465.94.00.25Edgebanding machinesinherited—No.
8465.94.00.35Laminating machinesinherited—No.
8465.94.00.45Coldinherited—No.
8465.94.00.55Otherinherited—No.
8465.94.00.65Otherinherited—No.
8465.94.00.91Otherinherited—No.
Table 2Statistical suffixes under 8465. Duty is assessed at the 10-digit level; the Column 1 rate is stated at the subheading and inherited below it.
ProgrammeRate as publishedContributionReported underIn force from
Column 1 General (MFN)2.4%2.40%—not established

Source: USITC, Harmonized Tariff Schedule of the United States, 2026 HTS Revision 17, published 2026-08-01. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading plus 25%25.00%9903.88.012018-07-06
Status unconfirmed. The second statutory four-year review of this action is running. The continuation-request deadlines for the underlying 2018 actions closed on 2026-07-05 and 2026-08-22 and no continuation notice has been published. There is no evidence of termination either, and the duty is almost certainly still collectible; what we cannot do is cite a document saying so.

Source: USTR, Notice of Action: China's Acts, Policies and Practices Related to Technology Transfer (List 1) (83 FR 28710), published 2018-06-20. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading + 12.5%12.50%9903.05.312026-07-24

Source: USTR, Notice of Actions in Section 301 Investigations of Various Economies (FR Doc. 2026-15181), published 2026-07-28. Verified 2026-08-31.

Table 3Duty stack for 8465.10.00.05 from China, resolved 2026-08-31.

Common questions

What is the duty rate for HTS 8465?
Heading 8465 covers machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8465.10.00.05, the first line under this heading. Its Column 1 rate is 2.4%; other lines under 8465 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 39.90% and Italy carries 10.00%.
Why does the rate differ by country for the same HTS code?
The Column 1 rate is the same for every origin with normal trade relations. Trade-remedy duties under Sections 232, 301 and 338 are imposed by origin, by product, or by both, so two shipments of the same article from different countries can carry very different totals.
Is this the rate I will actually pay?
It is the rate that applies to this classification and origin on the date shown. The duty owed on a specific entry also depends on the 10-digit statistical suffix, declared content where a duty is content-based, preference eligibility, and any AD/CVD order in scope.