Schedule in force 2026-08-31HTS 2026HTSRev17HTS 8467 · Chapter 84
Tariff Watch
For business

HTS 8467

Heading 8467 covers tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8467.11.10.40, the first line under this heading. Its Column 1 rate is 4.5%; other lines under 8467 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 42.00% and Italy carries 10.00%.

Chapter 84 · Verified 2026-08-31
HTS 2026HTSRev17

39 statistical lines under this heading · 2 distinct Column 1 rates · highest ad valorem total 42.00% from China · lowest 10.00% from Italy

OriginAd valorem layersLayersReported under
China CHN42.00%mfn + s301 + s3019903.88.01 9903.05.31
Vietnam VNM17.00%mfn + s3019903.05.84
Thailand THA17.00%mfn + s3019903.05.77
Brazil BRA17.00%mfn + s3019903.05.27
Mexico MEX14.50%mfn + s3019903.05.55
Canada CAN14.50%mfn + s3019903.05.29
India IND14.50%mfn + s3019903.05.44
United Kingdom GBR14.50%mfn + s3019903.05.81
Japan JPN12.50%s3019903.05.49
South Korea KOR12.50%s3019903.05.71
Germany DEU10.00%s3019903.05.39
Italy ITA10.00%s3019903.05.39
Table 1Rate by country of origin for 8467.11.10.40, resolved 2026-08-31. The first statistical line under 8467; other lines may carry different Column 1 rates.
CodeDescriptionColumn 1SpecialUnits
8467.11.10.40Grinders, polishers and sandersinherited—No.
8467.11.10.80Otherinherited—No.
8467.11.50.10Rock drillsinherited—No.
8467.11.50.20Drills, other than rock drills; screwdrivers and nut runnersinherited—No.
8467.11.50.40Wrenches, other than nut runnersinherited—No.
8467.11.50.90Otherinherited—No.
8467.19.10.00Suitable for metal working4.5%Free (A*,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No.
8467.19.50.30Pneumatic, hand-held force feed lubricating equipmentinherited—No.
8467.19.50.60Designed for use in construction or mininginherited—No.
8467.19.50.90Otherinherited—No.
8467.21.00.10Battery poweredinherited—No.
8467.21.00.30With a chuck capacity of less than 12.7 mminherited—No.
8467.21.00.50Otherinherited—No.
8467.21.00.70Other, including hammer drillsinherited—No.
8467.22.00.20Circularinherited—No.
8467.22.00.40Chaininherited—No.
8467.22.00.70Reciprocating and jiginherited—No.
8467.22.00.90Otherinherited—No.
8467.29.00.10Angle grinders, sanders and polishersinherited—No.
8467.29.00.15Orbital and straight-line sandersinherited—No.
8467.29.00.25Belt sandersinherited—No.
8467.29.00.35Otherinherited—No.
8467.29.00.40Screwdrivers, nut-runners and impact wrenchesinherited—No.
8467.29.00.55Routersinherited—No.
8467.29.00.65Planersinherited—No.
8467.29.00.70Grass and weed trimmers/edgersinherited—No.
8467.29.00.80Electropneumatic rotary and percussion hammersinherited—No.
8467.29.00.85Electric scissorsinherited—No.
8467.29.00.90Otherinherited—No.
8467.81.00.00Chain sawsFree—No.
8467.89.10.00Suitable for metal workingFree—No.
8467.89.50.30Gasoline powered grass and weed trimmers and brushcuttersinherited—No.
8467.89.50.60Other, designed for use in agriculture or horticultureinherited—No.
8467.89.50.90Otherinherited—No.
8467.91.01.00Of chain sawsFree—No.
8467.92.00.50Of pneumatic, hand-held force feed lubricating equipmentinherited—No.
8467.92.00.90Otherinherited—No.
8467.99.01.30Of gasoline powered grass and weed trimmers and brushcuttersinherited—No.
8467.99.01.90Otherinherited—No.
Table 2Statistical suffixes under 8467. Duty is assessed at the 10-digit level; the Column 1 rate is stated at the subheading and inherited below it.
ProgrammeRate as publishedContributionReported underIn force from
Column 1 General (MFN)4.5%4.50%—not established

Source: USITC, Harmonized Tariff Schedule of the United States, 2026 HTS Revision 17, published 2026-08-01. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading plus 25%25.00%9903.88.012018-07-06
Status unconfirmed. The second statutory four-year review of this action is running. The continuation-request deadlines for the underlying 2018 actions closed on 2026-07-05 and 2026-08-22 and no continuation notice has been published. There is no evidence of termination either, and the duty is almost certainly still collectible; what we cannot do is cite a document saying so.

Source: USTR, Notice of Action: China's Acts, Policies and Practices Related to Technology Transfer (List 1) (83 FR 28710), published 2018-06-20. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading + 12.5%12.50%9903.05.312026-07-24

Source: USTR, Notice of Actions in Section 301 Investigations of Various Economies (FR Doc. 2026-15181), published 2026-07-28. Verified 2026-08-31.

Table 3Duty stack for 8467.11.10.40 from China, resolved 2026-08-31.

Common questions

What is the duty rate for HTS 8467?
Heading 8467 covers tools for working in the hand, pneumatic, hydraulic or with self-contained electric or nonelectric motor, and parts thereof. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8467.11.10.40, the first line under this heading. Its Column 1 rate is 4.5%; other lines under 8467 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 42.00% and Italy carries 10.00%.
Why does the rate differ by country for the same HTS code?
The Column 1 rate is the same for every origin with normal trade relations. Trade-remedy duties under Sections 232, 301 and 338 are imposed by origin, by product, or by both, so two shipments of the same article from different countries can carry very different totals.
Is this the rate I will actually pay?
It is the rate that applies to this classification and origin on the date shown. The duty owed on a specific entry also depends on the 10-digit statistical suffix, declared content where a duty is content-based, preference eligibility, and any AD/CVD order in scope.