Schedule in force 2026-08-31HTS 2026HTSRev17HTS 8482 · Chapter 84
Tariff Watch
For business

HTS 8482

Heading 8482 covers ball or roller bearings, and parts thereof. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8482.10.10.40, the first line under this heading. Its Column 1 rate is 2.4%; other lines under 8482 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 64.90% and Italy carries 35.00%.

Chapter 84 · Verified 2026-08-31
HTS 2026HTSRev17

56 statistical lines under this heading · 2 distinct Column 1 rates · highest ad valorem total 64.90% from China · lowest 35.00% from Italy

OriginAd valorem layersLayersReported under
China CHN64.90%mfn + s232 + s301 + s3019903.88.03 9903.05.31 9903.94.05
Vietnam VNM39.90%mfn + s232 + s3019903.05.84 9903.94.05
Thailand THA39.90%mfn + s232 + s3019903.05.77 9903.94.05
Brazil BRA39.90%mfn + s232 + s3019903.05.27 9903.94.05
Japan JPN37.50%s232 + s3019903.05.49 9903.94.05
South Korea KOR37.50%s232 + s3019903.05.71 9903.94.05
Mexico MEX37.40%mfn + s232 + s3019903.05.55 9903.94.05
Canada CAN37.40%mfn + s232 + s3019903.05.29 9903.94.05
India IND37.40%mfn + s232 + s3019903.05.44 9903.94.05
United Kingdom GBR37.40%mfn + s232 + s3019903.05.81 9903.94.05
Germany DEU35.00%s232 + s3019903.05.39 9903.94.05
Italy ITA35.00%s232 + s3019903.05.39 9903.94.05
Table 1Rate by country of origin for 8482.10.10.40, resolved 2026-08-31. The first statistical line under 8482; other lines may carry different Column 1 rates.
CodeDescriptionColumn 1SpecialUnits
8482.10.10.40Bearings having an outside diameter not over 30 mminherited—No., kg
8482.10.10.80Otherinherited—No., kg
8482.10.50.04Unground bearingsinherited—No.
8482.10.50.08Thrust bearingsinherited—No., kg
8482.10.50.12Linear bearingsinherited—No., kg
8482.10.50.16Flangedinherited—No., kg
8482.10.50.24Otherinherited—No., kg
8482.10.50.28Otherinherited—No., kg
8482.10.50.32Maximum or full capacity typeinherited—No., kg
8482.10.50.36Under 9 mminherited—No., kg
8482.10.50.449 mm and over but not over 30 mminherited—No., kg
8482.10.50.48Over 30 mm but not over 52 mminherited—No., kg
8482.10.50.52Over 52 mm but not over 100 mm.inherited—No., kg
8482.10.50.56Over 100 mminherited—No., kg
8482.10.50.60Double row ball bearingsinherited—No., kg
8482.10.50.64Otherinherited—No., kg
8482.10.50.68Otherinherited—No., kg
8482.20.00.20Flangedinherited—No., kg
8482.20.00.30Otherinherited—No., kg
8482.20.00.40With cups having an outside diameter not exceeding 102 mminherited—No., kg
8482.20.00.61With cups having an outside diameter exceeding 102 mm but not exceeding 203 mminherited—No., kg
8482.20.00.64With cups having an outside diameter exceeding 203 mm but not exceeding 305 mminherited—No., kg
8482.20.00.67Otherinherited—No., kg
8482.20.00.70For cups having an outside diameter not exceeding 102 mminherited—No., kg
8482.20.00.81For cups having an outside diameter exceeding 102 mm but not exceeding 203 mminherited—No., kg
8482.20.00.90Otherinherited—No., kg
8482.30.00.40Single rowinherited—No., kg
8482.30.00.80Otherinherited—No., kg
8482.40.00.00Needle roller bearings, including cage and needle roller assemblies5.8%Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No., kg
8482.50.00.00Other cylindrical roller bearings, including cage and roller assemblies5.8%Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No., kg
8482.80.00.20Combined ball and spherical roller bearingsinherited—No., kg
8482.80.00.40Combined ball and needle roller bearingsinherited—No., kg
8482.80.00.60Combined ball and other cylindrical roller bearingsinherited—No., kg
8482.80.00.80Otherinherited—No., kg
8482.91.00.10Of alloy steelinherited—kg
8482.91.00.15Of copper or copper alloys as described in statistical note 8 to this chapterinherited—kg
8482.91.00.30Otherinherited—kg
8482.91.00.40Needlesinherited—kg
8482.91.00.50Tapered rollersinherited—kg
8482.91.00.70Spherical rollersinherited—kg
8482.91.00.80Other cylindrical rollersinherited—kg
8482.91.00.90Otherinherited—kg
8482.99.05.00For ball bearings9.9%Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)No., kg
8482.99.15.50Having an outside diameter not exceeding 203 mminherited—No., kg
8482.99.15.70Otherinherited—No., kg
8482.99.15.80Otherinherited—No., kg
8482.99.25.20For spherical roller bearingsinherited—No., kg
8482.99.25.40For needle bearingsinherited—No., kg
8482.99.25.60For other cylindrical roller bearingsinherited—No., kg
8482.99.25.80Otherinherited—No., kg
8482.99.35.00Parts of ball bearings (including parts of ball bearings with integral shafts)9.9%Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)kg
8482.99.45.00Parts of tapered roller bearings5.8%Free (A+,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)kg
8482.99.65.10For spherical roller bearingsinherited—kg
8482.99.65.30For needle bearingsinherited—kg
8482.99.65.60For other cylindrical roller bearingsinherited—kg
8482.99.65.95Otherinherited—kg
Table 2Statistical suffixes under 8482. Duty is assessed at the 10-digit level; the Column 1 rate is stated at the subheading and inherited below it.
ProgrammeRate as publishedContributionReported underIn force from
Column 1 General (MFN)2.4%2.40%—not established

Source: USITC, Harmonized Tariff Schedule of the United States, 2026 HTS Revision 17, published 2026-08-01. Verified 2026-08-31.

Section 232The duty provided in the applicable subheading + 25%25.00%9903.94.052025-04-03

This provision is listed both as a part of passenger vehicles and light trucks (U.S. note 33(g), heading 9903.94.05) and as a medium- and heavy-duty vehicle part (U.S. note 38(i), heading 9903.74.08). Which heading is reported depends on the vehicle the part is for. Both carry the same 25 percent rate, so the duty is the same either way.

Source: FEDERAL REGISTER, Proclamation 10908, adjusting imports of automobiles and automobile parts (FR Doc. 2025-05930), published 2025-04-03. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading + 25%25.00%9903.88.032018-09-24
Status unconfirmed. The second statutory four-year review of this action is running. The continuation-request deadlines for the underlying 2018 actions closed on 2026-07-05 and 2026-08-22 and no continuation notice has been published. There is no evidence of termination either, and the duty is almost certainly still collectible; what we cannot do is cite a document saying so.

Source: USTR, Notice of Modification of Section 301 Action: China's Acts, Policies and Practices Related to Technology Transfer (List 3) (83 FR 47974), published 2018-09-21. Verified 2026-08-31.

Section 301The duty provided in the applicable subheading + 12.5%12.50%9903.05.312026-07-24

Source: USTR, Notice of Actions in Section 301 Investigations of Various Economies (FR Doc. 2026-15181), published 2026-07-28. Verified 2026-08-31.

Table 3Duty stack for 8482.10.10.40 from China, resolved 2026-08-31.

Common questions

What is the duty rate for HTS 8482?
Heading 8482 covers ball or roller bearings, and parts thereof. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 8482.10.10.40, the first line under this heading. Its Column 1 rate is 2.4%; other lines under 8482 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 64.90% and Italy carries 35.00%.
Why does the rate differ by country for the same HTS code?
The Column 1 rate is the same for every origin with normal trade relations. Trade-remedy duties under Sections 232, 301 and 338 are imposed by origin, by product, or by both, so two shipments of the same article from different countries can carry very different totals.
Is this the rate I will actually pay?
It is the rate that applies to this classification and origin on the date shown. The duty owed on a specific entry also depends on the 10-digit statistical suffix, declared content where a duty is content-based, preference eligibility, and any AD/CVD order in scope.