Why does the rate differ by country for the same HTS code?

The Column 1 rate is the same for every origin with normal trade relations. Trade-remedy duties under Sections 232, 301 and 338 are imposed by origin, by product, or by both, so two shipments of the same article from different countries can carry very different totals.

Is this the rate I will actually pay?

It is the rate that applies to this classification and origin on the date shown. The duty owed on a specific entry also depends on the 10-digit statistical suffix, declared content where a duty is content-based, preference eligibility, and any AD/CVD order in scope.

HTS 7415

Heading 7415 covers nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 7415.10.00.00, the first line under this heading. Its Column 1 rate is 2.5%; other lines under 7415 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 90.00% and Italy carries 60.00%.

Chapter 74 · Verified 2026-08-31
HTS 2026HTSRev17

8 statistical lines under this heading · 3 distinct Column 1 rates · highest ad valorem total 90.00% from China · lowest 60.00% from Italy

Origin	Ad valorem layers	Layers	Reported under
China CHN	90.00%	mfn + s232 + s301 + s301	9903.88.03 9903.05.31 9903.82.02
Vietnam VNM	65.00%	mfn + s232 + s301	9903.05.84 9903.82.02
Thailand THA	65.00%	mfn + s232 + s301	9903.05.77 9903.82.02
Brazil BRA	65.00%	mfn + s232 + s301	9903.05.27 9903.82.02
Mexico MEX	62.50%	mfn + s232 + s301	9903.05.55 9903.82.02
Canada CAN	62.50%	mfn + s232 + s301	9903.05.29 9903.82.02
India IND	62.50%	mfn + s232 + s301	9903.05.44 9903.82.02
Japan JPN	62.50%	s232 + s301	9903.05.49 9903.82.02
South Korea KOR	62.50%	s232 + s301	9903.05.71 9903.82.02
United Kingdom GBR	62.50%	mfn + s232 + s301	9903.05.81 9903.82.02
Germany DEU	60.00%	s232 + s301	9903.05.39 9903.82.02
Italy ITA	60.00%	s232 + s301	9903.05.39 9903.82.02

Table 1Rate by country of origin for 7415.10.00.00, resolved 2026-08-31. The first statistical line under 7415; other lines may carry different Column 1 rates.

Code	Description	Column 1	Special	Units
7415.10.00.00	Nails and tacks, drawing pins, staples and similar articles	2.5%	Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg
7415.21.00.00	Washers (including spring washers)	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg
7415.29.00.00	Other	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg
7415.33.05.00	Screws for wood	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg
7415.33.10.00	Muntz or yellow metal bolts	1.4%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg
7415.33.80.10	Having shanks, threads or holes 6 mm or more in diameter	inherited	—	kg
7415.33.80.50	Having shanks, threads or holes less than 6 mm in diameter	inherited	—	kg
7415.39.00.00	Other	3%	Free (A,AU,B,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)	kg

Table 2Statistical suffixes under 7415. Duty is assessed at the 10-digit level; the Column 1 rate is stated at the subheading and inherited below it.

Programme	Rate as published	Contribution	Reported under	In force from
Column 1 General (MFN)	2.5%	2.50%	—	not established
Source: USITC, Harmonized Tariff Schedule of the United States, 2026 HTS Revision 17, published 2026-08-01. Verified 2026-08-31.
Section 232	The duty provided in the applicable subheading + 50%	50.00%	9903.82.02	2025-06-04
Source: FEDERAL REGISTER, Proclamation 11021, adjusting imports of aluminum, steel and copper (FR Doc. 2026-06960), published 2026-04-09. Verified 2026-08-31.
Section 301	The duty provided in the applicable subheading + 25%	25.00%	9903.88.03	2018-09-24
Status unconfirmed. The second statutory four-year review of this action is running. The continuation-request deadlines for the underlying 2018 actions closed on 2026-07-05 and 2026-08-22 and no continuation notice has been published. There is no evidence of termination either, and the duty is almost certainly still collectible; what we cannot do is cite a document saying so. Source: USTR, Notice of Modification of Section 301 Action: China's Acts, Policies and Practices Related to Technology Transfer (List 3) (83 FR 47974), published 2018-09-21. Verified 2026-08-31.
Section 301	The duty provided in the applicable subheading + 12.5%	12.50%	9903.05.31	2026-07-24
Source: USTR, Notice of Actions in Section 301 Investigations of Various Economies (FR Doc. 2026-15181), published 2026-07-28. Verified 2026-08-31.

Table 3Duty stack for 7415.10.00.00 from China, resolved 2026-08-31.

Common questions

What is the duty rate for HTS 7415?: Heading 7415 covers nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper. Duty is assessed at the 10-digit statistical line; the figures here are resolved for 7415.10.00.00, the first line under this heading. Its Column 1 rate is 2.5%; other lines under 7415 carry different Column 1 rates. On top of that, the ad valorem total depends on origin: China carries 90.00% and Italy carries 60.00%.
Why does the rate differ by country for the same HTS code?: The Column 1 rate is the same for every origin with normal trade relations. Trade-remedy duties under Sections 232, 301 and 338 are imposed by origin, by product, or by both, so two shipments of the same article from different countries can carry very different totals.
Is this the rate I will actually pay?: It is the rate that applies to this classification and origin on the date shown. The duty owed on a specific entry also depends on the 10-digit statistical suffix, declared content where a duty is content-based, preference eligibility, and any AD/CVD order in scope.